Whether you build or buy a bat house, make sure the dimensions meet the criteria below. Following these construction and installation guidelines will greatly increase your odds of attracting bats. These recommendations are based on 12 years of bat house research conducted across the U.S, Canada , and the Caribbean . Small, poorly-made houses commonly sold in stores or any house, improperly installed are likely to fail.

1. Design
All bat houses should be at least 2 feet tall, have chambers at least 20 inches tall and 14 inches wide, and have a landing area extending below the entrance at least 3 to 6 inches (some houses feature recessed partitions that offer landing space inside). Taller and wider houses are even better. Rocket boxes should be at least 3 feet tall and have at least 12 inches of linear roost space. Most bat houses have one to four roosting chambers-the more the better. Roost partitions should be carefully spaced ¾ to 1 inch apart. All partitions and landing areas should be roughened. Wood surfaces can be scratched or grooved horizontally, at roughly ¼- to ½-inch intervals, or covered with durable square, plastic mesh (1/8 or ¼ inch mesh, available from companies such as Internet, Inc. at 1-800-328-8456 or Aquamasters at 410-252-2079). Include vents approximately 6 inches from the bottom of all houses 24 to 32 inches tall where average July high temperatures are 85º F or above. Front vents are as long as a house is wide, side vents 6 inches tall by ½ inch wide. Houses 36 inches tall or taller should have vents approximately 10 to 12 inches from the bottom.

2. Construction
For wooden houses, a combination of exterior plywood (ACX, BCX, or T1-11 grade) and cedar is best. Plywood for bat house exteriors should be ½-inch thick or greater and have at least four plies. Do not use pressure-treated wood. Any screws, hardware or staples used must be exterior grade (galvanized, coated, stainless, etc). To increase longevity, use screws rather than nails. Caulk all seams, especially around the roof. Alternative materials, such as plastic or fiber-cement board, may last longer and require less maintenance.

3. Wood Treatment
For the exterior, apply three coats of exterior grade, water-based paint or stain. Available observations suggest that color should be black where average high temperatures in July are less than 85º F, dark colors (such as dark brown or dark gray) where they are 85 to 95° F, medium colors where they are 95 to 100º F and white or light colors where they exceed 100º F. Much depends upon amount of sun exposure; adjust to darker colors for less sun. For the interior, use two coats dark, exterior grade, water-based stain. Apply stain after creating scratches or grooves or prior to stapling plastic mesh. Paint fills grooves, making them unusable.

Areas

Wooden Houses

Plastic/Stucco Houses

1) Dark areas:

black

dark color

2) Medium areas:

dark or medium color

medium color

3) Light areas:

medium color

light color

4) Lightest areas:

white or light color

light color


4. Sun Exposure

Houses where high temperatures in July average 80º F or less, should receive at least 10 hours of sun; more is better. At least six hours of direct daily sun are recommended for all bat houses where daily high temperatures in July average less than 100º F. Full, all-day sun is often successful in all but the hottest climates. To create favorable conditions for maternity colonies in summer, internal bat house temperatures should stay between 80º F and 100º F as long as possible.

5. Habitat
Most nursery colonies of bats choose roosts within 1/4 mile of water, preferably a stream, river or lake. Greatest bat house success has been achieved in areas of diverse habitat, especially where there is a mixture of varied agricultural use and natural vegetation. Bat houses are most likely to succeed in regions where bats are already attempting to live in buildings.

6. Mounting
Bat houses should be mounted on buildings or poles. Houses mounted on trees or metal siding are seldom used. Wooden, brick, or stone buildings with proper solar exposure are excellent choices, and locations under the eaves often are successful. Single-chamber houses work best when mounted on buildings. Mounting two bat houses back to back on poles is ideal (face one house north, the other south). Place houses 3/4 inch apart and cover both with a galvanized metal roof to protect the center roosting space from rain. All bat houses should be mounted at least 12 feet above ground; 15 to 20 feet is better. Bat houses should not be lit by bright lights.

7. Protection from Predators
Houses mounted on sides of buildings or on metal poles provide the best protection from predators. Metal predator guards may be helpful, especially on wooden poles. Bat houses may be found more quickly if located along forest or water edges where bats tend to fly; however, they should be placed at least 20 to 25 feet from the nearest tree branches, wires or other potential perches for aerial predators.

8. Avoiding Uninvited Guests
Wasps can be a problem before bats fully occupy a house. Use of 3/4-inch roosting spaces reduces wasp use. If nests accumulate, they should be removed in late winter or early spring before either wasps or bats return. Open-bottom houses greatly reduce problems with birds, mice, squirrels or parasites, and guano does not accumulate inside.

9. Timing
Bat houses can be installed at any time of the year, but are more likely to be used during their first summer if installed before the bats return in spring. When evicting a colony from a building, install the bat houses at least two to six weeks before the actual eviction, if possible.

10. Importance of Local Experimentation
It is best to test for local needs before putting up more than three to six houses, especially comparing those of different darkness and sun exposure.

Ensuring the Success of Your Bat House

Go Back
eXTReMe Tracker